Litokol X-Gel® Bianco | Cementitious tile adhesive | 20 kg for approx. 7.4 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · X-Gel® BiancoC2 TE tile adhesive in white for tiles, porcelain & natural stone
Light wall tiles in a bathroom, white porcelain tiles in a kitchen or a welcoming entrance: beneath light-coloured coverings, the adhesive should remain discreet while being easy to apply and providing a reliable bond.
X-Gel® is a creamy polymer gel with a low cement content. It spreads easily under the trowel and provides 100 % tile wetting. In white, it remains discreet beneath light-coloured coverings, with uncompromising performance right down to the adhesive bed.
- Creamy & lightweight
- 100 % wetting
- Indoors & outdoors
- White for light-coloured coverings
- Bathrooms, showers & wet areas
- Terraces & balconies
- Tile-on-tile installation
- Underfloor heating
- Floors & walls, indoors & outdoors
- Residential, commercial & public areas
- Ceramic tiles
- Porcelain tiles in all sizes
- Natural stone
- Screeds & smoothing compounds
- Render & plasterboard
- Existing tiles
- Waterproofing layers
- Concrete & fibre cement
- Gypsum and anhydrite only after priming with X-Prime®, not on wood
Outdoors and in heavily loaded areas, ensure full adhesive coverage when laying tiles, using the combined method with adhesive on the tile backs where necessary. Protect the area from heavy rain for 24 hours.
Powder gel in a 20 kg bag in white, creamy and non-slump on floors and walls:
- Mixing6.2 to 6.8 l of water per 20 kgLeave to stand for 5 minutes, then stir briefly
- Application temperature+5 °C to +35 °CWorking time 6 to 8 hours
- Tile placement timeover 40 minutesLayer thickness 1 to 15 mm
- Ready for foot traffic after12 hoursgrout walls after 6–8 hours and floors after 12 hours
- Ready for full service after5 daysat +23 °C
- Shelf life12 monthsstore in the original packaging in a dry place
Lasting performance
- 7.4 m²Average coverage per 20 kg, depending on trowel notch size
- −40 to +90 °CService temperature range
- C2 TEto EN 12004
- < 29 %cement content thanks to polymer gel technology
Coverage and quantities
One 20 kg bag covers an average of approx. 7.4 m². Coverage depends primarily on the trowel notch size and application method.
6 mm notched trowel: approx. 8 m² per bag.
8 mm notched trowel: approx. 6.7 m² per bag.
10 mm notched trowel: approx. 5.7 m² per bag.
Coverage decreases when adhesive is also applied to the back of the tiles. Further consumption information is available in the technical data sheet.
Delivery
3–7days delivery time, express delivery on request
You receive a 20 kg bag in white. The same performance is also available for dark coverings as X-Gel® Grigio.
Advice
Freepersonal expert advice
Unsure about the substrate, tile size or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from the substrate to the final joint.
Grout · cementitiousX-Color® 06Extra-fine, satin-finish CG2 WA grout in 20 Lissoni colours for joints up to 6 mm: it gives coverings installed with X-Gel® a water-repellent finish with brilliant colour.View product →
Silicone · movement jointsPixel® 3DSanitary silicone in 20 colours, colour-matched to Lissoni grouts: it provides a permanently elastic seal for perimeter, corner and movement joints, with an allowable movement of 25 %, so the bonded covering can accommodate movement at edges and transitions without cracking.View product →
Primer · penetrating primerX-Prime®Penetrating primer in a 10 kg canister covering around 33 to 100 m²: it consolidates dusty, absorbent substrates and isolates gypsum and anhydrite before applying X-Gel® on top.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, from the substrate to the final tile.
Back to topLitokol-X-Gel-Technisches-Datenblatt-DE.pdf X-Gel_Technisches_Datenblatt_EN.pdf X-Gel_Technisches_Datenblatt_FR.pdf X-Gel_Technisches_Datenblatt_IT.pdf X-Gel_Technisches_Datenblatt_ES.pdf X-Gel_Leistungserklaerung_DE.pdf X-Gel_Leistungserklaerung_EN.pdf X-Gel_Leistungserklaerung_FR.pdf X-Gel_Leistungserklaerung_IT.pdf X-Gel_Leistungserklaerung_ES.pdf
