Litokol PowerGel® Pro Max Ultra Bianco | Two-component epoxy adhesive and waterproofing for pools and mosaics | 10 kg for approx. 3.8 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · PowerGel® Pro MaxTwo-component epoxy adhesive & waterproofing for pools, mosaics & natural stone
A pool, a level-access shower or a terrace with large-format tiles: every tile should stay in place for decades, without a drop of water getting underneath. That reliability starts where nobody will see it later, in the adhesive bed.
Separate waterproofing and adhesive layers create interfaces and risks. PowerGel® Pro Max combines both in one elastic epoxy gel, crack-bridging and watertight, with uncompromising performance right beneath the tiles.
- Adhesive & waterproofing
- From showers to yacht pools
- Crack-bridging
- For glass mosaic & marble
- Bathrooms, showers & wet areas
- Pools, basins & fountains
- Yacht pools & marine applications
- Spa & hammam
- Terraces, balconies & façades
- Floors & walls, indoors & outdoors
- Tile-on-tile installation & underfloor heating
- Commercial & heavily used areas
- Porcelain & large-format tiles
- Ceramic tiles
- Glass & ceramic mosaic
- Marble, granite & natural stone
- Resin-backed natural stone
- Terracotta & clinker tiles
- Resin- & cement-based composites
- Metal tiles & laminated glass
- On screed, concrete, plasterboard, existing tiles, wood, metal, PVC & GRP, including cracks up to 3 mm
At temperatures around +10 °C curing is accelerated by EpoxyGel Booster using one 200 g sachet per 10 kg of PowerGel® Pro Max.
Two precisely matched components in a 10 kg combined pack: add all of part B to part A and mix mechanically at around 300 rpm to a creamy consistency.
- Coverageapprox. 6.7 m² per 10 kgwith a 3.5 mm notched trowel; combined application to substrate and tile back approx. 5 kg/m²
- Application temperature+5 °C to +35 °Caround +10 °C with EpoxyGel Booster
- Working timeover 120 minutesLayer thickness 1 to 15 mm
- Ready for foot traffic after12 hoursgrout walls after 12 hours and floors after 24 hours
- Ready for full service after5 daysSwimming pools after 7 days
- Shelf life36 monthsstore in the original packaging in a dry, frost-free place
Lasting performance
- 3 mmcracked substrate, securely bonded and waterproofed
- −40 to +90 °CService temperature range
- 1.5 barwaterproof under positive pressure, also tested with chlorinated water
- MEDapproved for marine use under 2014/90/EU, including yacht pools
Coverage and quantities
One 10 kg pack covers an average of approx. 3.8 m². Coverage depends primarily on the trowel notch size and application method.
6 mm notched trowel: approx. 4 m² per pack.
8 mm notched trowel: approx. 3.3 m² per pack.
10 mm notched trowel: approx. 2.9 m² per pack.
Coverage decreases when adhesive is also applied to the back of the tiles. Further consumption information is available in the technical data sheet.
Delivery
3–7days delivery time, express delivery on request
You receive a 10 kg combined pack in Ultra Bianco, with parts A and B pre-dosed. The same performance is also available for dark coverings as PowerGel® Pro Max Grigio.
Advice
Freepersonal expert advice
Unsure about the substrate, trowel notch size or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from waterproofing to care.
Grout · epoxy resinStarlike® ProEpoxy resin grout in 75 colours for joints from 1 to 20 mm: it gives the surface over PowerGel® Pro Max a waterproof, acid-resistant finish, meeting the highest demands for appearance and grout performance, from shower floors to pools.View product →
Silicone · movement jointsPixel® 3DSanitary silicone in 20 colours, colour-matched to Starlike® Pro: it provides a permanently elastic seal for perimeter, corner and movement joints, with an allowable movement of 25 %, ensuring waterproofing with PowerGel® Pro Max stays watertight at every transition, in bathrooms and pools alike.View product →
Sealant · poolsHydroPixel®White hybrid sealant in a 290 ml cartridge that bonds even underwater: it seals jets, skimmers, drains and lights, the critical penetrations in every pool, ensuring waterproofing with PowerGel® Pro Max remains continuous.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, from waterproofing to the final tile.
Back to topLitokol_PowerGel_Pro_Max_Technisches_Datenblatt_DE.pdf Litokol_PowerGel_Pro_Max_Technical_Data_Sheet_EN.pdf Litokol_PowerGel_Pro_Max_Fiche_technique_FR.pdf Litokol_PowerGel_Pro_Max_Scheda_tecnica_IT.pdf Litokol_PowerGel_Pro_Max_Ficha_tecnica_ES.pdf Litokol_PowerGel_Pro_Max_Leistungserklaerung_DE.pdf Litokol_PowerGel_Pro_Max_Declaration_of_Performance_EN.pdf Litokol_PowerGel_Pro_Max_Declaration_des_performances_FR.pdf Litokol_PowerGel_Pro_Max_Dichiarazione_di_prestazione_IT.pdf Litokol_PowerGel_Pro_Max_Declaracion_de_prestaciones_ES.pdf
