Litokol X-Color® 06 | Cementitious grout for 0–6 mm joints | 3 kg for approx. 7.7 m² / 20 kg for approx. 51.5 m² (30 × 30 × 1 cm, 3 mm joint)
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · X-Color® 06Cementitious grout for fine joints from 0 to 6 mm in 20 colours
Finely laid mosaic, rectified porcelain or polished stone with barely visible joints: the narrower the joint, the more its colour shapes the overall appearance. It should blend in or create a deliberate accent, never look accidental.
Ordinary cementitious joints absorb water and fade. X-Color® 06 is extra-fine, satin-finish and water-repellent, in brilliant Lissoni colours, with uncompromising performance and Italian design right into the finest joint.
- Joints from 0 to 6 mm
- 20 Lissoni colours
- Satin-finish & extra-fine
- Water-repellent CG2 WA
- Bathrooms, showers & wet areas
- Pools, spas & hammams
- Basins & fountains
- Terraces & balconies
- Façades
- Floors & walls, indoors & outdoors
- Underfloor heating
- Residential, commercial & public areas
- Glass & ceramic mosaic
- Porcelain tiles
- Ceramic tiles
- Slabs
- Natural stone
- Marble
- Joints from 0 to 6 mm, indoors & outdoors, including underfloor heating
For pools, terraces and balconies, mix with BoostColor instead of water, using 0.9 l per 3 kg bag, for even greater water repellency.
Powder in a 3 kg bag in 20 colours, or in a 20 kg bag in selected colours, mixed with 28 to 30 % water, around 0.8 to 0.9 l per 3 kg: fill joints thoroughly, then clean with a damp sponge once the grout has started to set.
- Application temperature+5 °C to +35 °CAllow the adhesive to cure fully first
- Working timeapprox. 40 minuteswith the X-Color rubber grout float
- Joint width0 to 6 mmKeep joints clear to two-thirds of the tile thickness
- Ready for foot traffic after24 hoursat +23 °C
- Ready for full service after7 daysSwimming pools after 14 days
- Shelf life24 monthsin a 3 kg bag; 12 months in a 20 kg bag
Lasting performance
- ≤ 2 gWater absorption after 30 minutes
- −30 to +80 °CService temperature range
- CG2 WAto EN 13888, improved and water-repellent
- ≥ 15 N/mm²Compressive strength after 28 days
Coverage and quantities
For 30 × 30 cm tiles, a joint depth of 10 mm and a joint width of 3 mm, 3 kg covers approx. 7.7 m² or 20 kg approx. 51.5 m².
2 mm joint width: 3 kg for approx. 11.6 m², 20 kg for approx. 77.3 m².
3 mm joint width: 3 kg for approx. 7.7 m², 20 kg for approx. 51.5 m².
5 mm joint width: 3 kg for approx. 4.6 m², 20 kg for approx. 30.9 m².
All examples assume 30 × 30 cm tiles and a joint depth of 10 mm. Other sizes or depths change consumption. Further consumption information is available in the technical data sheet.
Curated by Piero Lissoni
20colours available from Tiamont
The “I Colori della Terra” colour chart uses the same numbers and names as Pixel® 3D and Starlike® Pro: Italian design right down to the joints, from light Sabbia Bianca to deep Nero Antico, for colour-matched grout and silicone joints.
Our design recommendation
We are happy to provide personal design advice for every project. We coordinate silicone, grout and tiles so that transitions blend seamlessly or create deliberate accents.
Colour display note: the swatches are based on the original colour chart. Actual shades may vary slightly depending on your screen, its calibration and the lighting on site.
Tap a colour to view it at full width.
-
02
Sabbia Bianca
-
04
Pomice di Lipari
-
06
Nebbia
-
07
Cenere
-
08
Terra di Bruma
-
10
Ardesia
-
12
Nero Antico
-
13
Argilla Bianca
-
20
Limo del Nilo
-
21
Calce di Marrakech
-
22
Terra di Volterra
-
24
Argilla Bruciata
-
26
Bianco di Spagna
-
27
Caolino
-
28
Dune
-
29
Terra di Borgogna
-
30
Argilla di Cipro
-
31
Terra Fumicata
-
34
Terracotta
-
35
Arenaria
Delivery
3–7days delivery time, express delivery on request
You receive a 3 kg bag in your chosen colour, or a 20 kg bag in Sabbia Bianca, Pomice di Lipari, Cenere and Bianco di Spagna.
Advice
Freepersonal expert advice
Unsure about the colour, joint width or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from installation to care.
Silicone · movement jointsPixel® 3DSanitary silicone in the same 20 Lissoni colours, with matching colour numbers: the tile grout and silicone joints blend tone on tone, while Pixel® 3D keeps perimeter, corner and movement joints alongside X-Color® 06 permanently elastic and stain-resistant.View product →
Additive · grout latexBoostColorHighly water-repellent latex in a 5 kg canister, used instead of water at 0.9 l per 3 kg of X-Color® 06: it makes the grout even more water-repellent and deformable, ideal for balconies, terraces, pools and underfloor heating.View product →
Cleaning · acid-basedX-CleanerAcid-based cement haze remover in a 5 l canister that does not attack cementitious joints: after at least 5 days, it removes the fine haze from tiles so the colour of X-Color® 06 can show clearly.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, right through to the final joint.
Back to top
