Litokol UltraGel® Pro Bianco | Ready-to-use mosaic adhesive for bathrooms and showers | 10 kg for approx. 3.8 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · UltraGel® Pro BiancoReady-to-use D2 TE mosaic adhesive for bathrooms & showers, white
Ceramic wall tiles in a bathroom, natural stone around a washbasin or an entire bathroom in medium-format porcelain: where water is a regular factor, a ready-to-use adhesive needs to do more than simply hold.
UltraGel® Pro is elastic, crack-resistant and reinforced with quartz microspheres. It comes cement-free and ready to use straight from the bucket, and bonds even under occasional water contact, with uncompromising performance right into the shower.
- For bathrooms & showers
- Elastic & crack-resistant
- Ready to use
- Directly on gypsum
- Bathrooms & showers
- Walls in wet areas
- Mosaic & glass mosaic
- Indoor floors
- Underfloor heating
- Residential, commercial & public areas
- Ceramic tiles
- Mosaic
- Medium-format porcelain tiles
- Dimensionally stable natural stone
- Plasterboard
- Gypsum & anhydrite
- Screeds & render
- Waterproofing layers
- Indoor areas with occasional water contact, including underfloor heating
UltraGel® cures by releasing water: the substrate and tile must be absorbent. Maximum layer thickness 5 mm; do not use where early foot traffic is required. For pools and outdoor areas, choose cementitious gel adhesives such as PowerGel® S1+. Non-absorbent coverings must not be bonded to non-absorbent substrates. This applies in particular to glass mosaic over an impermeable waterproofing layer; choose a suitable cementitious or reaction resin adhesive for this build-up.
Ready-to-use polymer gel in a 10 kg bucket, applied directly with a notched trowel:
- Coverageapprox. 6.7 m² per 10 kg1.5 kg/m² with a 3.5 mm notched trowel
- Application temperature+5 °C to +35 °Cprotect from frost during transport and storage
- Tile placement timeover 30 minutesLayer thickness 1 to 5 mm
- Ready for foot traffic after24 hoursgrout walls after 12 hours and floors after 24 hours
- Ready for full service after7 daysat +23 °C
- Shelf life24 monthsin the original packaging, dry and frost-free
Lasting performance
- 100 %pure gel in an H₂O phase, cement-free
- −30 to +90 °CService temperature range
- D2 TEto EN 12004
- Crack-resistantreinforced with quartz microspheres
Coverage and quantities
One 10 kg bucket covers an average of approx. 3.8 m². Coverage depends primarily on the trowel notch size and application method.
6 mm notched trowel: approx. 4 m² per bucket.
8 mm notched trowel: approx. 3.3 m² per bucket.
10 mm notched trowel: approx. 2.9 m² per bucket.
The covering and substrate must be suitable for the intended build-up. Further consumption information is available in the technical data sheet.
Delivery
3–7days delivery time, express delivery on request
You receive a 10 kg bucket in white.
Advice
Freepersonal expert advice
Unsure about the substrate, tile size or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from the substrate to the final joint.
Waterproofing · indoorHydroPad® IndoorReady-to-use DM 01 P waterproofing gel for bathrooms and showers: subsequent bonding with UltraGel® Pro requires sufficient absorbency within the build-up. Non-absorbent glass mosaic on the waterproofing requires a suitable cementitious or reaction resin adhesive.View product →
Grout · cementitiousX-Color® 06Extra-fine, satin-finish CG2 WA grout in 20 Lissoni colours for joints up to 6 mm: it provides a water-repellent finish for mosaics installed with UltraGel® Pro in bathrooms and showers.View product →
Silicone · movement jointsPixel® 3DSanitary silicone in 20 colours, colour-matched to Lissoni grouts: it provides a permanently elastic seal for perimeter, corner and movement joints, with an allowable movement of 25 %, so baths, shower trays and bathroom corners remain as watertight as the tiled surface.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, from the substrate to the final tile.
Back to topLitokol_UltraGel_Pro_Technisches_Datenblatt_DE.pdf Litokol_UltraGel_Pro_Technical_Data_Sheet_EN.pdf Litokol_UltraGel_Pro_Fiche_technique_FR.pdf Litokol_UltraGel_Pro_Scheda_tecnica_IT.pdf Litokol_UltraGel_Pro_Ficha_tecnica_ES.pdf Litokol_UltraGel_Pro_Leistungserklaerung_DE.pdf Litokol_UltraGel_Pro_Declaration_of_Performance_EN.pdf Litokol_UltraGel_Pro_Declaration_des_performances_FR.pdf Litokol_UltraGel_Pro_Dichiarazione_di_prestazione_IT.pdf Litokol_UltraGel_Pro_Declaracion_de_prestaciones_ES.pdf
