Litokol X-Activator® | Bonding primer for smooth and absorbent surfaces | 5 kg for approx. 66.7 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · X-Activator®Bonding primer for smooth and absorbent substrates, also for tile-on-tile installation
Existing tiles, linoleum, wood or a floor with adhesive residues: renovation without demolition saves weeks of work, dust and expense. Yet new adhesive struggles to bond to smooth, non-absorbent surfaces.
X-Activator® creates a strong polymer bonding bridge on tiles, wood, PVC and concrete, dry after 30 minutes and ready for covering after one hour, with uncompromising performance right into the substrate.
- For tile-on-tile installation
- Dry after 30 minutes
- Does not run
- Indoors & outdoors
- Tile-on-tile installation
- Renovation without demolition
- Floors with adhesive residues
- Walls & floors
- Underfloor heating
- Indoors & outdoors
- Ceramic tiles
- Porcelain tiles
- Natural stone
- Concrete
- Fibre cement boards
- Wood
- PVC & linoleum
- Metal
- Also surfaces with organic adhesive residues
Not suitable for tiling surfaces in permanent contact with water such as pools or bathtubs. For outdoor walls, metal, PVC or linoleum, consult Litokol technical support first. We are happy to put you in touch.
Ready to use in a 5 kg bucket, applied with a roller or brush in a layer below 1 mm: at 50 to 100 g/m², one bucket covers around 50 to 100 m².
- ApplicationRoller or brushbelow 1 mm, without additives
- Consumption50–100 g/m²depending on the substrate
- PreparationAbrade paint, PVC and linoleumRemove all dust and grease
- Ready for covering afterapprox. 1 hourwith cementitious products
- Application temperature+5 °C to +35 °CDry substrate with no rising damp
- Shelf life24 monthsstore in a dry, frost-free place
Lasting performance
- 30 minuntil the primer is dry
- −20 to +80 °CService temperature range
- Does not runflows more readily under pressure, ideal for walls
- EC1 PLUSvery low emissions, A+ indoor air rating
Coverage and quantities
One 5 kg bucket covers an average of approx. 66.7 m².
5 m²: approx. 0.4 kg.
10 m²: approx. 0.8 kg.
20 m²: approx. 1.5 kg.
The examples use average consumption. The absorbency of the substrate affects the actual quantity required. Further consumption information is available in the technical data sheet.
Delivery
3–7days delivery time, express delivery on request
You receive a 5 kg bucket.
Advice
Freepersonal expert advice
Unsure about the substrate, build-up or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from the substrate to the final joint.
Cleaning · degreaserX-Cleaner ScrubAlkaline deep cleaner in a 1 l bottle, free from caustic soda: it removes grease, wax and care-product films from existing tiles, because X-Activator® does not replace thorough substrate cleaning.View product →
Adhesive · cementitiousPowerGel® S1+Elastic, crack-resistant C2 TE S1 cementitious adhesive in Ultra Bianco and Grigio, designed for overlay installations: over X-Activator® it bonds the new covering directly to the old, indoors and outdoors.View product →
Waterproofing · indoorHydroPad® IndoorReady-to-use DM 01 P waterproofing gel in a 5 kg bucket covering around 6.25 m², ready for covering after one hour: in bathrooms, it waterproofs primed existing tiles before the new covering is installed.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, right through to the final joint.
Back to top
