Litokol PowerGel® S2+ Ultra Bianco | Cementitious tile adhesive | 20 kg for approx. 9.6 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · PowerGel® S2+ Ultra BiancoHighly deformable C2 TE S2 tile adhesive in Ultra Bianco for large-format tiles & natural stone
White large-format tiles by a pool, light slabs on a roof terrace or porcelain tiles over underfloor heating: maximum movement meets maximum visibility. The adhesive needs both exceptional deformability and a pure white colour.
PowerGel® S2+ is a highly deformable class S2 Smart Gel, elastic, crack-resistant and exceptionally lightweight, to hold even extra-large slabs securely. In Ultra Bianco, it remains discreet beneath light-coloured tiles and natural stone, with uncompromising performance right down to the adhesive bed.
- Maximum deformability
- For pools & façades
- For extra-large slabs
- Pure white for light-coloured coverings
- Bathrooms, showers & wet areas
- Pools & fountains
- Marine applications & yachts
- Terraces & balconies
- Spa & hammam
- Façades
- Tile-on-tile installation & underfloor heating
- Commercial & heavily used areas
- Ceramic tiles
- Porcelain tiles in all sizes
- Natural stone
- Screeds & smoothing compounds
- Render & plasterboard
- Existing tiles
- Waterproofing & uncoupling layers
- Concrete & fibre cement
- Gypsum and anhydrite only after priming with X-Prime®, not on wood
Outdoors and in heavily loaded areas, ensure full adhesive coverage when laying tiles, using the combined method with adhesive on the tile backs where necessary. Protect the area from heavy rain for 24 hours.
Powder gel in a 20 kg bag in Ultra Bianco, creamy and non-slump on floors and walls:
- Mixing5.0 to 5.6 l of water per 20 kgLeave to stand for 5 minutes, then stir briefly
- Application temperature+5 °C to +35 °CWorking time 6 to 8 hours
- Tile placement timeover 60 minutesLayer thickness 1 to 20 mm
- Ready for foot traffic after12 hoursgrout walls after 3 hours and floors after 12 hours
- Ready for full service after5 daysSwimming pools after 14 days
- Shelf life12 monthsstore in the original packaging in a dry place
Lasting performance
- 9.6 m²Average coverage per 20 kg, depending on trowel notch size
- −40 to +90 °CService temperature range
- C2 TE S2to EN 12004
- MEDapproved for marine use under 2014/90/EU
Coverage and quantities
One 20 kg bag covers an average of approx. 9.6 m². Coverage depends primarily on the trowel notch size and application method.
6 mm notched trowel: approx. 11.1 m² per bag.
8 mm notched trowel: approx. 8.3 m² per bag.
10 mm notched trowel: approx. 6.7 m² per bag.
Coverage decreases when adhesive is also applied to the back of the tiles. Further consumption information is available in the technical data sheet.
Delivery
3–7days delivery time, express delivery on request
You receive a 20 kg bag in Ultra Bianco. The same performance is also available for dark coverings as PowerGel® S2+ Grigio.
Advice
Freepersonal expert advice
Unsure about the substrate, tile size or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from the substrate to the final joint.
Waterproofing · gel membraneSafetyGel®Elastic gel membrane in a 20 kg pack covering around 20 m², waterproof at over 3 bar and elastic down to −20 °C: it provides seamless waterproofing for pools and terraces, while PowerGel® S2+ bonds large-format tiles on top with a highly deformable bond.View product →
Grout · epoxy resinStarlike® ProEpoxy resin grout in 75 colours for joints from 1 to 20 mm, meeting the highest demands for appearance and grout performance: it gives slabs installed with PowerGel® S2+ a waterproof, acid-resistant finish, in pools and on façades alike.View product →
Silicone · movement jointsPixel® 3DSanitary silicone in 20 colours, colour-matched to Lissoni grouts: it provides a permanently elastic seal for perimeter, corner and movement joints, with an allowable movement of 25 %, to safely accommodate the greater movement of extra-large slabs at edges and expansion joints.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, from the substrate to the final tile.
Back to topLitokol-PowerGel-S2-Plus-Technisches-Datenblatt-DE.pdf PowerGel_S2__Technisches_Datenblatt_EN.pdf PowerGel_S2__Technisches_Datenblatt_FR.pdf PowerGel_S2__Technisches_Datenblatt_IT.pdf PowerGel_S2__Technisches_Datenblatt_ES.pdf PowerGel_S2__Leistungserklaerung_DE.pdf PowerGel_S2__Leistungserklaerung_EN.pdf PowerGel_S2__Leistungserklaerung_FR.pdf PowerGel_S2__Leistungserklaerung_IT.pdf PowerGel_S2__Leistungserklaerung_ES.pdf
