Litokol PowerGel® Pro Grigio | Two-component epoxy adhesive for pools, mosaics and natural stone | 10 kg for approx. 3.8 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · PowerGel® ProGrey two-component epoxy adhesive for pools, large-format tiles & natural stone
Black Marquina, grey slate or anthracite large-format tiles: dark coverings do not tolerate a light adhesive showing through or causing stains. They need an adhesive that stays visually discreet and delivers technically.
Cementitious adhesives reach their limits when faced with moisture, cracks and difficult substrates. PowerGel® Pro Grigio creates a continuous, elastic bond without water or cement, with uncompromising performance right down to the adhesive bed.
- Stain-free on natural stone
- From bathrooms to yacht pools
- For large-format tiles
- Grey for dark coverings
- Bathrooms, showers & wet areas
- Pools, basins & fountains
- Yacht pools & marine applications
- Spa & hammam
- Terraces, balconies & façades
- Floors & walls, indoors & outdoors
- Tile-on-tile installation & underfloor heating
- Commercial & heavily used areas
- Porcelain & large-format tiles
- Ceramic tiles
- Glass & ceramic mosaic
- Marble, granite & natural stone
- Resin-backed natural stone
- Terracotta & clinker tiles
- Resin- & cement-based composites
- Laminated glass panels
- On screed, concrete, plasterboard, existing tiles, waterproofing, wood, metal, PVC & GRP, including cracks up to 2 mm
If the adhesive also needs to provide waterproofing to EN 14891, then PowerGel® Pro Max is the right choice: adhesive and waterproofing in one material.
Two precisely matched components in a 10 kg combined pack: add all of part B to part A and mix mechanically to a creamy consistency, without adding any water.
- Coverageapprox. 6.7 m² per 10 kgwith a 3.5 mm notched trowel; combined application to substrate and tile back approx. 5 kg/m²
- Application temperature+5 °C to +35 °Caround +10 °C with EpoxyGel Booster
- Working timeover 60 minutesLayer thickness 1 to 20 mm
- Ready for foot traffic after12 hoursgrout walls after 12 hours and floors after 24 hours
- Ready for full service after5 daysSwimming pools after 7 days
- Shelf life36 monthsstore in the original packaging in a dry, frost-free place
Lasting performance
- 2 mmcracked substrate, securely bonded into a continuous system
- −40 to +90 °CService temperature range
- ≥ 2 N/mm²Shear adhesion, including after water immersion and thermal shock
- MEDapproved for marine use under 2014/90/EU, including yacht pools
Coverage and quantities
One 10 kg pack covers an average of approx. 3.8 m². Coverage depends primarily on the trowel notch size and application method.
6 mm notched trowel: approx. 4 m² per pack.
8 mm notched trowel: approx. 3.3 m² per pack.
10 mm notched trowel: approx. 2.9 m² per pack.
Coverage decreases when adhesive is also applied to the back of the tiles. Further consumption information is available in the technical data sheet.
Delivery
3–7days delivery time, express delivery on request
You receive a 10 kg combined pack in Grigio, with parts A and B pre-dosed. The same performance is also available for glass mosaic and light-coloured coverings as PowerGel® Pro Ultra Bianco.
Advice
Freepersonal expert advice
Unsure about the substrate, trowel notch size or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from waterproofing to care.
Grout · epoxy resinStarlike® ProEpoxy resin grout in 75 colours for joints from 1 to 20 mm: like PowerGel® Pro, it works without cement and gives the surface a waterproof, acid-resistant finish, meeting the highest demands for appearance and grout performance, including on marble and in pools.View product →
Waterproofing · gel membraneSafetyGel®Elastic gel membrane in a 20 kg pack covering around 20 m², waterproof at over 3 bar and requiring no sealing tape at corners: it waterproofs the full surface of pools, showers and terraces before PowerGel® Pro creates a continuous adhesive bond for the covering on top.View product →
Silicone · movement jointsPixel® 3DSanitary silicone in 20 colours, colour-matched to Starlike® Pro: it provides a permanently elastic seal for perimeter, corner and movement joints, with an allowable movement of 25 %, so the firmly bonded covering can accommodate movement at every transition without cracking.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, from the substrate to the final tile.
Back to topLitokol_PowerGel_Pro_Technisches_Datenblatt_DE.pdf Litokol_PowerGel_Pro_Technical_Data_Sheet_EN.pdf Litokol_PowerGel_Pro_Fiche_technique_FR.pdf Litokol_PowerGel_Pro_Scheda_tecnica_IT.pdf Litokol_PowerGel_Pro_Ficha_tecnica_ES.pdf Litokol_PowerGel_Pro_Leistungserklaerung_DE.pdf Litokol_PowerGel_Pro_Declaration_of_Performance_EN.pdf Litokol_PowerGel_Pro_Declaration_des_performances_FR.pdf Litokol_PowerGel_Pro_Dichiarazione_di_prestazione_IT.pdf Litokol_PowerGel_Pro_Declaracion_de_prestaciones_ES.pdf
