Litokol PowerGel® Grigio | Cementitious tile adhesive | 20 kg for approx. 9.6 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · PowerGel® GrigioLightweight C2 TE tile adhesive in grey for large-format tiles & natural stone
A bathroom with large porcelain tiles, a natural stone terrace or a façade in full sun: the larger the area, the more adhesive is needed and the heavier each bucket becomes. Performance and lightness rarely come together.
PowerGel® is a lightweight Smart Gel with quartz microspheres, requiring only around 1.1 kg/m² with a 3.5 mm notched trowel and forming a continuous adhesive bond. In grey, it is ideal beneath dark tiles and stone, with uncompromising performance right down to the adhesive bed.
- Ultra-lightweight & creamy
- Only 1.1 kg/m²
- For large-format tiles
- Grey for dark coverings
- Bathrooms, showers & wet areas
- Pools & fountains
- Marine applications & yachts
- Terraces & balconies
- Spa & hammam
- Façades
- Tile-on-tile installation & underfloor heating
- Commercial & heavily used areas
- Ceramic tiles
- Porcelain tiles in all sizes
- Natural stone
- Screeds & smoothing compounds
- Render & plasterboard
- Existing tiles
- Waterproofing & uncoupling layers
- Concrete & fibre cement
- Gypsum and anhydrite only after priming with X-Prime®, not on wood
Outdoors and in heavily loaded areas, ensure full adhesive coverage when laying tiles, using the combined method with adhesive on the tile backs where necessary. Protect the area from heavy rain for 24 hours.
Powder gel in a 20 kg bag in grey, creamy and non-slump on floors and walls:
- Mixing5.6 to 6.2 l of water per 20 kgLeave to stand for 5 minutes, then stir briefly
- Application temperature+5 °C to +35 °CWorking time 6 to 8 hours
- Tile placement timeover 60 minutesLayer thickness 1 to 20 mm
- Ready for foot traffic after12 hoursgrout walls after 3 hours and floors after 12 hours
- Ready for full service after5 daysSwimming pools after 14 days
- Shelf life12 monthsstore in the original packaging in a dry place
Lasting performance
- 9.6 m²Average coverage per 20 kg, depending on trowel notch size
- −40 to +90 °CService temperature range
- C2 TEto EN 12004
- MEDapproved for marine use under 2014/90/EU
Coverage and quantities
One 20 kg bag covers an average of approx. 9.6 m². Coverage depends primarily on the trowel notch size and application method.
6 mm notched trowel: approx. 11.1 m² per bag.
8 mm notched trowel: approx. 8.3 m² per bag.
10 mm notched trowel: approx. 6.7 m² per bag.
Coverage decreases when adhesive is also applied to the back of the tiles. Further consumption information is available in the technical data sheet.
Delivery
3–7days delivery time, express delivery on request
You receive a 20 kg bag in grey. The same performance is also available for light-coloured coverings as PowerGel® Ultra Bianco.
Advice
Freepersonal expert advice
Unsure about the substrate, tile size or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from the substrate to the final joint.
Grout · epoxy resinStarlike® ProEpoxy resin grout in 75 colours for joints from 1 to 20 mm, meeting the highest demands for appearance and grout performance: it gives coverings installed with PowerGel® a waterproof, acid-resistant finish, from bathrooms to terraces.View product →
Silicone · movement jointsPixel® 3DSanitary silicone in 20 colours, colour-matched to Lissoni grouts: it provides a permanently elastic seal for perimeter, corner and movement joints, with an allowable movement of 25 %, so the continuously bonded covering can accommodate movement at edges and transitions without cracking.View product →
Waterproofing · gelHydroPad®Breathable CM 02 P waterproofing gel in a 15 kg bag covering around 6.5 m², waterproof at 1.5 bar: it waterproofs bathrooms, terraces and pools, while PowerGel® bonds the covering directly on top.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, from the substrate to the final tile.
Back to topLitokol-PowerGel-Technisches-Datenblatt-DE.pdf PowerGel_Technisches_Datenblatt_EN.pdf PowerGel_Technisches_Datenblatt_FR.pdf PowerGel_Technisches_Datenblatt_IT.pdf PowerGel_Technisches_Datenblatt_ES.pdf PowerGel_Leistungserklaerung_DE.pdf PowerGel_Leistungserklaerung_EN.pdf PowerGel_Leistungserklaerung_FR.pdf PowerGel_Leistungserklaerung_IT.pdf PowerGel_Leistungserklaerung_ES.pdf
