Litokol HydroProof Anti-Fracture | Waterproofing membrane beneath tiles | 30 × 1 m roll for approx. 30 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · HydroProof Anti-FractureWaterproofing membrane & vapour retarder beneath tiles for pools, showers & terraces
Above all, waterproofing should be consistent. No thin patches, no drying times, no uncertainty about the weather. Especially over large areas, every point needs to provide exactly the same protection.
HydroProof Anti-Fracture rolls out as a membrane, is immediately watertight and reliably retards water vapour, remaining elastic down to −30 °C, with uncompromising performance right beneath the tiles.
- Immediately watertight
- Vapour retarder Sd > 50 m
- Consistent thickness
- Elastic down to −30 °C
- Pools & fountains
- Bathrooms, showers & wet areas
- Terraces & balconies
- Spa & hammam
- Façades
- Tile-on-tile installation
- Industrial floors
- Large areas
- Screeds
- Smoothing & levelling compounds
- Render
- Existing tiles
- Concrete & reinforced concrete
- Plasterboard
- Gypsum & anhydrite
- Fibre cement & lightweight construction boards
- Also for underfloor heating
Secure membrane joints and edges with HydroBand Anti-Fracture and HydroCorner, bonded with HydroBand Gel. Outdoors, install the covering within 72 hours or protect from UV light.
Membrane on a 30 m roll at 1 m wide for 30 m²: an elastic polyethylene film faced on both sides with polypropylene fleece for high adhesion with Litokol gel adhesives.
- Area30 m² per roll100 cm wide, fully waterproof
- Thickness0.5 mm285 g/m²
- Elongation at break130 % across the width55 % lengthwise
- Application temperature+5 °C to +35 °Ckeep above +5 °C for 72 hours afterwards as well
- Service temperature−30 °C to +90 °CReaction to fire: B2
- Shelf lifeunlimitedstore away from direct sunlight
Lasting performance
- Sd > 50 mVapour retarder to EN 12572
- −30 to +90 °CService temperature range
- > 1.5 barResistance to water pressure
- EN 13956tested waterproofing membrane
Coverage and quantities
One roll contains 30 m² of material at a width of 1 m.
5 m length: 5 m² of membrane material.
10 m length: 10 m² of membrane material.
20 m length: 20 m² of membrane material.
Allow extra for cutting, waste and required overlaps. Further consumption information is available in the technical data sheet.
Delivery
3–7days delivery time, express delivery on request
You receive one 30 m² roll, 30 m long and 1 m wide.
Advice
Freepersonal expert advice
Unsure about the substrate, build-up or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from waterproofing to the final joint.
Waterproofing · sealing tapeHydroBand Anti-FractureElastic sealing tape on a 50 m roll, waterproof at over 1.5 bar and with 300 % transverse elongation: it bridges membrane joints, edges and movement joints where HydroProof alone cannot continue.View product →
Waterproofing · adhesive gelHydroBand GelRapid-setting sealing gel in a 3 kg bag for around 15 m of tape: it bonds tape and corners watertight to the membrane, and the covering can follow immediately.View product →
Adhesive · cementitiousPowerGel® S1+ Ultra BiancoElastic, crack-resistant C2 TE S1 cementitious adhesive in Ultra Bianco and Grigio, approved for marine use: it bonds tiles and natural stone securely to HydroProof's fleece and accommodates movement over time.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, from waterproofing to the final tile.
Back to top
