Litokol HydroBand Anti-Fracture | Elastic sealing tape | 50 m
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · HydroBand Anti-FractureElastic sealing tape for corners, transitions & movement joints
The surface is waterproofed, but water always seeks the weakest point: the corner between floor and wall, a change in shower slope or a joint between moving building elements. These are the points that determine whether waterproofing holds.
Rigid transitions crack with the first movement. HydroBand Anti-Fracture stretches across its width by up to 300 % and remains watertight at over 1.5 bar, with uncompromising performance right into every corner.
- 300 % transverse elongation
- Waterproof at over 1.5 bar
- For movement joints
- Chemically resistant
- Wall-to-floor transitions
- Corners & edges
- Changes in slope
- Movement & perimeter joints
- Pools & fountains
- Bathrooms & showers
- Terraces & balconies
- Spa & hammam
- Screeds
- Smoothing & levelling compounds
- Render
- Existing tiles
- Concrete & reinforced concrete
- Plasterboard
- Gypsum & anhydrite
- Fibre cement & lightweight construction boards
- Bonded with HydroPad®, HydroBand Gel or Litokol cementitious waterproofing products
Not suitable for structural joints; use HydroBand Joint Anti-Fracture for this purpose. Never leave the tape exposed; always cover it with waterproofing and the covering.
Multilayer tape on a 50 m roll, 120 mm wide and waterproof across its full width: an elastic polyethylene film faced on both sides with polypropylene fleece for maximum adhesion within the waterproofing.
- Width120 mmwaterproof across the full width
- Thickness0.6 mm230 g/m²
- Elongation at break300 % across the width70 % lengthwise
- BondingHydroPad or HydroBand Gelalso Litokol cementitious waterproofing
- Service temperature−30 °C to +90 °Cchemically resistant, including to seawater
- Shelf lifeunlimitedstore away from direct sunlight
Lasting performance
- 300 %Elongation at break across the width
- 120 NLongitudinal breaking load per 15 mm
- > 1.5 barResistance to water pressure
- Seawater-resistantresistant to acids, alkalis and chlorine
Delivery
3–7days delivery time, express delivery on request
You receive a 50 m roll in grey.
Advice
Freepersonal expert advice
Unsure about the substrate, build-up or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from waterproofing to the final joint.
Waterproofing · gelHydroPad®Breathable CM 02 P waterproofing gel in a 15 kg bag covering around 6.5 m², waterproof at 1.5 bar: the first coat bonds HydroBand Anti-Fracture in place, and the second seals the surface seamlessly.View product →
Waterproofing · internal cornerHydroCorner InternalPreformed internal corner, 120 × 400 mm, using the same multilayer technology: it closes the corner without folds where HydroBand Anti-Fracture meets from two directions.View product →
Waterproofing · adhesive gelHydroBand GelRapid-setting sealing gel in a 3 kg bag for around 15 m of tape: it bonds HydroBand Anti-Fracture watertight, and the covering can follow immediately, ideal for outdoor work in changeable weather.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, from waterproofing to the final tile.
Back to top
