Litokol X-Tone Matt | Matt colour enhancer for natural stone and porcelain stoneware | 2 × 1 l | For approx. 35 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
X-Tone Matt, matt colour enhancement with integrated stain protection
X-Tone Matt is a matt colour enhancer for natural stone, ceramics and joints, with integrated stain protection. The water-based impregnating treatment intensifies and evens out the colour without forming a glossy surface film.
Your benefits at a glance
- Matt colour enhancement and stain protection in one step.
- For absorbent natural stone, cotto, concrete, pebbles, ceramics and suitable composite materials.
- Suitable for refreshing the appearance of cement and epoxy joints.
- UV- and weather-resistant for dry surfaces indoors and outdoors.
Applications and use
For clean, dry surfaces that are not overheated. As the colour is visibly deepened, assess the visual effect on a sample area beforehand.
Apply a thin, undiluted coat to absorbent surfaces; repeat after 2 to 3 hours if necessary. On low-absorbency substrates, dilute 1:1 or 1:2 with water and remove all excess after around 5 minutes.
Important: Allow freshly laid or grouted surfaces to cure fully. Do not work in direct sunlight; apply only to completely dry surfaces.
What is included and expert advice
Included: 2 bottles of 1 l each. Delivery time: Delivery time: 3-14 working days. Free shipping.
Tiamont is an official Litokol specialist retailer in Germany. On request, we review your substrate, application and material requirements before ordering – personally and free of charge.
Technical times and consumption values apply under standard conditions. Temperature, humidity, substrate and application method may affect values in practice.
Key technical data
| Parameter | Value |
|---|---|
| Product type | Matt colour enhancer and protective impregnating treatment |
| Working time | approx. 5 to 10 minutes |
| Consumption | approx. 15 to 20 m²/l |
| Coverage of this offer | approx. 30 to 40 m² |
| Dilution on low-absorbency surfaces | 1 : 1 or 1 : 2 with water |
| Second application | after 2 to 3 hours if necessary |
| Ready for traffic | after approx. 4 hours at the earliest |
| pH value | 6.5 to 7.5 |
| Application temperature | +5 °C to +35 °C |
