Litokol HydroPad® Fast waterproofing | Fast-drying, for pool and shower | 4 × 15 kg | For approx. 26 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
HydroPad® Fast, predictable waterproofing with short waiting times
HydroPad® Fast is fast-drying waterproofing for pools and showers beneath tiles, mosaics and natural stone. Its consistency can be adjusted for floors or walls, forming a continuous water barrier in two applications and allowing short waiting times under standard conditions.
Your benefits at a glance
- Tested waterproofing to EN 14891, class CM 02 P, also for chlorinated water and outdoor areas.
- 4-Way-Flex technology accommodates movement in several directions and supports crack bridging.
- Breathable membrane: Liquid water is kept out while water vapour can escape from the substrate.
- Apply with a smoothing trowel, roller or brush; suitable for absorbent substrates and prepared existing tiles.
Applications and use
Suitable for indoor and outdoor floors and walls, including showers, bathrooms, pools, fountains, spas, terraces, balconies and underfloor heating. The substrate must be firm, clean, sound and free from rising damp.
Mix the powder with 22 to 28 % water, allow to stand for 5 minutes, then briefly remix. Apply two even coats of about 1 mm each. Incorporate corners, junctions, joints and penetrations into the system using the appropriate HydroBand accessories.
Important: The total dry layer thickness must exceed 2 mm. Apply the second coat after about 4 hours; under standard conditions, tiles can be laid 12 hours after the final application.
What is included and expert advice
Included: 4 bags of 15 kg each (60 kg). Delivery time: Delivery time: 3-14 working days. Free shipping.
Tiamont is an official Litokol specialist retailer in Germany. On request, we review your substrate, application and material requirements before ordering – personally and free of charge.
Technical times and consumption values apply under standard conditions. Temperature, humidity, substrate and application method may affect values in practice.
Key technical data
| Parameter | Value |
|---|---|
| Classification | CM 02 P to EN 14891 |
| Consumption | approx. 2.3 kg/m² for both coats |
| Coverage of this offer | approx. 26 m² at 2.3 kg/m² |
| Mixing water | 22 to 28 %; approx. 3.3 to 4.2 l per 15 kg |
| Working time | > 60 minutes |
| Waiting time between coats | approx. 4 hours |
| Waiting time before laying the covering | approx. 12 hours |
| Total dry thickness | > 2 mm |
| Application temperature | +5 °C to +35 °C |
| Service temperature | -20 °C to +90 °C |
Litokol_HydroPad_Fast_Technisches_Datenblatt_DE.pdf Litokol_HydroPad_Fast_Technical_Data_Sheet_EN.pdf Litokol_HydroPad_Fast_Fiche_technique_FR.pdf Litokol_HydroPad_Fast_Scheda_tecnica_IT.pdf Litokol_HydroPad_Fast_Ficha_tecnica_ES.pdf Litokol_HydroPad_Fast_Leistungserklaerung_DE.pdf Litokol_HydroPad_Fast_Declaration_of_Performance_EN.pdf Litokol_HydroPad_Fast_Declaration_des_performances_FR.pdf Litokol_HydroPad_Fast_Dichiarazione_di_prestazione_IT.pdf Litokol_HydroPad_Fast_Declaracion_de_prestaciones_ES.pdf
