Litokol UltraGel® Grigio | Ready-to-use mosaic & tile adhesive for interiors | 4 × 10 kg | covers approx. 27 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
UltraGel Grigio, ready-to-use tile adhesive for interiors
UltraGel Grigio is a ready-to-use mosaic and tile adhesive for indoor floors and walls. The cement-free D1-TE polymer gel is suitable for mosaic, tiles, small-format porcelain stoneware and stable natural stone slabs, and is applied directly from the bucket.
Your benefits at a glance
- Classified D1 TE with extended open time and reduced slip.
- Ready-to-use and resealable, with no mixing and clean application.
- Can be applied directly to suitable gypsum substrates without an isolating primer.
- Highly spreadable, thixotropic consistency for indoor floors and walls.
Applications and use
Suitable for tiles, mosaic and small-format porcelain stoneware on sound plaster, screeds, concrete, gypsum, plasterboard and prepared existing coverings. For indoor use only; stable marble and natural stone slabs can be used, but moisture- or deformation-sensitive natural stones require a suitable reaction resin system. Do not use outdoors, in swimming pools or on surfaces permanently exposed to water.
Clean the substrate and check its soundness. Spread the gel with a notched trowel appropriate to the tile size and lay the covering within the open time. On floors, aim for the fullest possible adhesive coverage.
Important: Use the product undiluted. Reseal opened containers immediately and store frost-free.
Included in delivery and expert advice
Included in delivery: 4 buckets of 10 kg (40 kg). Delivery time: Delivery time: 3-14 working days. Free shipping.
Tiamont is an official Litokol specialist retailer in Germany. On request, we personally assess your substrate, application and requirements before you order, free of charge.
Technical times and consumption figures apply under standard conditions. Temperature, humidity, substrate and application method may affect actual values.
Which Litokol adhesive suits your project?
| Adhesive | Suitable for | Key difference |
|---|---|---|
| UltraGel Bianco / Grigio | Tiles, mosaic, small-format porcelain stoneware and stable natural stone slabs indoors | Ready-to-use, D1 TE; not for outdoor use, pools or permanent water exposure |
| UltraGel Pro Bianco | Mosaic, tiles and stable natural stone in indoor bathrooms and showers | Ready-to-use, D2 TE; for intermittent water contact, not for pools |
| PowerGel Pro Grigio / Ultra Bianco | Mosaic, tiles, large formats and natural stone indoors, outdoors and in pools | 2-component R2 T epoxy adhesive for heavy loads and critical substrates |
| PowerGel Pro Max Ultra Bianco | Mosaic, tiles and natural stone indoors, outdoors and in pools | 2-component epoxy adhesive plus RM 01 P waterproofing |
The final adhesive choice also depends on the substrate, covering, format, water exposure and construction method. Tiamont can advise you before you order.
Technical data
| Parameter | Value |
|---|---|
| Classification | D1 TE according to EN 12004 |
| Coverage of this offer | approx. 26.7 m² at 1.5 kg/m² |
| Layer thickness | 1 to 5 mm |
| Open time | > 30 minutes |
| Consumption | approx. 1.5 to 3.5 kg/m² depending on notch size |
| Waiting time before grouting | Walls approx. 12 h; floors approx. 24 h |
| Walkable after | approx. 24 hours |
| Ready for use | approx. 7 days |
| Application temperature | +5 °C to +35 °C |
| Service temperature | -30 °C to +90 °C |
