Litokol Pixel® Precision 2-component adhesive gel | For steps, edges & mitres | 3 × 215 ml | for approx. 17 linear metres of joints
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Pixel® Precision, precise 2-component gel for steps, edges and mitres
Litokol Pixel® Precision is a fast-curing 2-component adhesive gel for edges, steps and mitres in tiles, porcelain stoneware and natural stone. The waterproof, UV-resistant bonding and decorative gel creates durable bonds and can be sanded and polished after a short time.
Your benefits at a glance
- Waterproof, stain-resistant and UV-resistant for high-quality detail work.
- Very high adhesion without primer on many typical construction and industrial materials.
- Fast curing: machining and polishing possible after approximately 45 to 60 minutes.
- Six colour variants for visually coordinated edges and transitions.
Applications and use
For fast bonding and colour-coordinated finishing of edges, steps, profiles and mitres in ceramic, porcelain stoneware, natural stone, quartz and comparable materials.
Use the 2-component cartridge with a suitable mixing tip and apply only within the short gel time. Align components precisely and secure until sufficient initial strength develops; the surface can then be sanded and polished.
Important: The gel time is only a few minutes. Fully prepare the work area, tools and components before dispensing.
Included in delivery and expert advice
Included in delivery: 3 cartridges of 215 ml. Delivery time: Delivery time: 3-14 working days. Free shipping.
Tiamont is an official Litokol specialist retailer in Germany. On request, we personally assess your substrate, application and requirements before you order, free of charge.
Technical times and consumption figures apply under standard conditions. Temperature, humidity, substrate and application method may affect actual values.
Technical data
| Parameter | Value |
|---|---|
| Product type | Ready-to-use 2-component cartridge |
| Mixing ratio | 2 : 1 |
| Gel time | approx. 3 to 5 minutes |
| Curing time | approx. 25 minutes at +23 °C |
| Polishable after | approx. 45 to 60 minutes at +23 °C |
| Adhesion to ceramic after 1 hour | 10 MPa |
| Application temperature | +5 °C to +30 °C |
| Service temperature | -25 °C to +60 °C |
| Packaging | 3 × 215 ml |
