Litokol Litotex | Uncoupling mat for tiles | 50 × 1 m roll for approx. 50 m²
- Quality by Litokol Lab S.p.A.
- Italian expertise since 1968
- Coordinated professional systems
- Delivery in 3-7 days (express available)
Litokol · LitotexUncoupling mat for tiles & natural stone on cracked substrates
An existing tiled floor full of hairline cracks, a screed that is still moving or a substrate with a history: a new tile laid directly on top would take up every movement and eventually crack too.
Litotex uncouples the covering from the substrate using glass fibre mesh between two fleeces and requires up to 50 % less adhesive than embossed membranes, with uncompromising performance without any demolition.
- Isolates stresses
- Up to 50 % less adhesive
- Ready for immediate covering
- No demolition
- Tile-on-tile installation
- Cracked, difficult substrates
- Bathrooms & showers
- Spa & hammam
- Residential & commercial buildings
- Industrial floors
- Screeds
- Smoothing & levelling compounds
- Existing tiles & natural stone
- Concrete
- Gypsum & anhydrite
- Fibre cement boards
- Indoor use only
For indoor use only. Do not install on damp substrates with a CM moisture content above 5 % or on wood that is not moisture-resistant. Always cover with tiles, natural stone or mosaic.
Roll measuring 50 m long and 1 m wide for 50 m²: glass fibre mesh between two polypropylene fleeces, just 0.85 mm thick and ready for immediate covering.
- Area50 m² per roll100 cm wide
- Thickness0.85 mm235 g/m²
- Ready for coveringimmediatelywith tiles, natural stone or mosaics
- Shear adhesion≥ 1.0 N/mm²to ANSI A118.1
- Useindoorsfloors and walls
- Shelf lifeunlimitedstore in the original packaging in a dry place
Lasting performance
- > 900 NBreaking load per 50 mm, lengthwise and across the width
- up to 50 %less adhesive than embossed membranes
- 0.85 mmextremely low build-up height
- Glass fibreMesh between two fleeces
Coverage and quantities
One roll contains 50 m² of material at a width of 1 m.
5 m length: 5 m² of membrane material.
10 m length: 10 m² of membrane material.
20 m length: 20 m² of membrane material.
Allow extra for cutting, waste and required overlaps. Further consumption information is available in the technical data sheet.
Delivery
3–7days delivery time, express delivery on request
You receive one 50 m² roll, 50 m long and 1 m wide.
Advice
Freepersonal expert advice
Unsure about the substrate, build-up or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from waterproofing to the final joint.
Adhesive · cementitiousPowerGel® S1+ Ultra BiancoElastic, crack-resistant C2 TE S1 cementitious adhesive in Ultra Bianco and Grigio, approved for marine use: it bonds Litotex to the existing covering and the new covering on top, providing an elastic, crack-resistant build-up in one operation.View product →
Cleaning · degreaserX-Cleaner ScrubAlkaline deep cleaner in a 1 l bottle, free from caustic soda: it removes grease and wax from existing tiled floors so Litotex and the adhesive can bond across the full surface.View product →
Levelling · self-levelling compoundX-Plan® 1-20Rapid-setting CT C30 F6 self-levelling compound in a 20 kg bag for layers from 1 to 20 mm: it levels uneven existing floors before Litotex is rolled out on top, ready for covering after just 3 hours.View product →
Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projectsWe are always happy to help with your project, from waterproofing to the final tile.
Back to top
