Litokol HydroPad® Indoor waterproofing | For indoor bathrooms & showers | 4 × 5 kg | covers approx. 9 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
HydroPad® Indoor, reliable waterproofing for bathrooms and showers
HydroPad® Indoor is a bathroom and shower waterproofing material for indoor floors and walls beneath tiles, mosaic and natural stone. The flexible waterproofing gel can be adjusted for floor or wall use and forms a continuous water barrier in two coats.
Your benefits at a glance
- Tested waterproofing to EN 14891, class CM 02 P, also for chlorinated water
- 4-Way-Flex technology accommodates movement in multiple directions and supports crack bridging.
- Breathable membrane: keeps out liquid water while allowing water vapour to escape from the substrate.
- Apply with a finishing trowel, roller or brush; suitable for absorbent substrates and prepared existing tiles.
Applications and use
Suitable for indoor and outdoor floors and walls, including showers, bathrooms, pools, fountains, spas, terraces, balconies and underfloor heating. The substrate must be firm, clean, sound and free from rising damp.
Mix the powder with 22 to 28 % water, leave to stand for 5 minutes, then briefly remix. Apply two even coats of approximately 1 mm each. Integrate corners, connections, joints and penetrations into the system using suitable HydroBand accessories.
Important: The total dry thickness must exceed 2 mm. Apply the second coat after approximately 4 hours; under standard conditions, tiles can be laid 12 hours after the final coat.
Included in delivery and expert advice
Included in delivery: 4 containers of 5 kg (20 kg). Delivery time: Delivery time: 3-14 working days. Free shipping.
Tiamont is an official Litokol specialist retailer in Germany. On request, we personally assess your substrate, application and requirements before you order, free of charge.
Technical times and consumption figures apply under standard conditions. Temperature, humidity, substrate and application method may affect actual values.
Technical data
| Parameter | Value |
|---|---|
| Classification | CM 02 P according to EN 14891 |
| Consumption | approx. 2.3 kg/m² for both coats |
| Coverage of this offer | approx. 8.7 m² at 2.3 kg/m² |
| Mixing water | 22 to 28 %; approx. 3.3 to 4.2 l per 15 kg |
| Working time | > 60 minutes |
| Waiting time between coats | approx. 4 hours |
| Waiting time before laying coverings | approx. 12 hours |
| Total dry thickness | > 2 mm |
| Application temperature | +5 °C to +35 °C |
| Service temperature | -20 °C to +90 °C |
